WinNT RTEMS build question

[Jmills at TGA.com (John Mills)]

Hello All -
I am setting up RTEMS for an Hitachi SH target on a WinNT host. I patched
and built binutils-2.9.1 and egcs-1.1b/newlib-1.8.0 with no major
discrepancies, and ran the simple 'f.c' test of 'sh-rtems-gcc' with the
attached results.

Configuring to build RTEMS hangs on the test for a working sh-rtems-gcc, at
line 1574 of 'rtems-4.0.0/configure', with the attached 'configure'
printout. I get the same result whether I use the distribution's 'bit_rtems'
script or the attached one I wrote.

Any suggestions?
TIA
 - Mills 

  John Mills, Sr. Software Engineer
  TGA Technologies, Inc.
  100 Pinnacle Way, Suite 140
  Norcross, GA 30071-3633
  e-mail: jmills at tga.com
  Phone: 770-441-2100 ext.124 (voice)
         770-449-7740 (FAX)

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://rtems.rtems.org/pipermail/rtems-users/attachments/19990805/a3e0ab27/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: f_c_build.log
Type: application/octet-stream
Size: 38 bytes
Desc: not available
Url : http://rtems.rtems.org/pipermail/rtems-users/attachments/19990805/a3e0ab27/attachment.obj 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: build_rtems
Type: application/octet-stream
Size: 435 bytes
Desc: not available
Url : http://rtems.rtems.org/pipermail/rtems-users/attachments/19990805/a3e0ab27/attachment-0001.obj 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: rtems_build.log
Type: application/octet-stream
Size: 1615 bytes
Desc: not available
Url : http://rtems.rtems.org/pipermail/rtems-users/attachments/19990805/a3e0ab27/attachment-0002.obj