Correction - RE: WinNT RTEMS build question

[Jmills at TGA.com (John Mills)]

Here is the correct sh-rtems-gcc test results for my previous note: I had
forgotten to set PATH when I re-ran the example. I had set PATH correctly to
run the scripts, and the reported failures occur.

Sorry for the false start.

  John Mills, Sr. Software Engineer
  TGA Technologies, Inc.
  100 Pinnacle Way, Suite 140
  Norcross, GA 30071-3633
  e-mail: jmills at tga.com
  Phone: 770-441-2100 ext.124 (voice)
         770-449-7740 (FAX)

-----Original Message-----
From: John Mills 
Sent: Thursday, August 05, 1999 10:20 AM
To: rtems-list at oarcorp.com
Cc: John Mills
Subject: WinNT RTEMS build question


Hello All -
I am setting up RTEMS for an Hitachi SH target on a WinNT host. I patched
and built binutils-2.9.1 and egcs-1.1b/newlib-1.8.0 with no major
discrepancies, and ran the simple 'f.c' test of 'sh-rtems-gcc' with the
attached results.

Configuring to build RTEMS hangs on the test for a working sh-rtems-gcc, at
line 1574 of 'rtems-4.0.0/configure', with the attached 'configure'
printout. I get the same result whether I use the distribution's 'bit_rtems'
script or the attached one I wrote.

Any suggestions?
TIA
 - Mills 

  John Mills, Sr. Software Engineer
  TGA Technologies, Inc.
  100 Pinnacle Way, Suite 140
  Norcross, GA 30071-3633
  e-mail: jmills at tga.com
  Phone: 770-441-2100 ext.124 (voice)
         770-449-7740 (FAX)

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://rtems.rtems.org/pipermail/rtems-users/attachments/19990805/d86adb60/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: f_c_build.log
Type: application/octet-stream
Size: 1040 bytes
Desc: not available
Url : http://rtems.rtems.org/pipermail/rtems-users/attachments/19990805/d86adb60/attachment.obj