Some beginner's questions

[Jmills at TGA.com (John Mills)]

Hello -
I have built RTEMS tools (sh-rtems-*) using 'bit' and rtems-4.0.0 using
'bit_rtems' under Gnu/Linux-2.2.5 (RH6.0), and the 'hello_world_c' example
('test.*') with apparent success. I will initially be targeting Hitachi's
EDK7045F developer's board. My two next questions are:

1) How and from which directory should I invoke 'size_rtems' to get a scale
for what was built, or is that appropriate at this stage?

2) Where should I add code for a simple console, so it will be built into my
executable?

I have written serial I/O drivers as a stand-alone demo.

I expect I need to touch the startup code as well as the console driver. I
found the 'no_bsp_console' example, but need to know where to put a
filled-in version and to have it linked.

Thanks for any suggestions.
  -mills

  John Mills, Sr. Software Engineer
  TGA Technologies, Inc.
  100 Pinnacle Way, Suite 140
  Norcross, GA 30071-3633
  e-mail: jmills at tga.com
  Phone: 770-441-2100 ext.124 (voice)
         770-449-7740 (FAX)