[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Timmer & timer-ticks on 68360
- Date: Thu, 11 May 2000 10:26:11 -0500
- From: janovetz at tempest.ece.uiuc.edu (Jake Janovetz)
- Subject: Timmer & timer-ticks on 68360
I've had this trouble before. It has to do with the way your
clock/PLL is configured for your board versus how Eric set things
up for the BSP. I _believe_ Eric assumes a 25 MHz clock oscillator
connected to the 68360 whereas things will be slightly different if
you use a 4 MHz oscillator and work with that (which is what I do).
If you think this could be the source of your trouble, let me know
and I can email you changes I make to the BSP.
On Thu, May 11, 2000 at 06:26:38PM +0200, gerke.kok at ascom.nl wrote:
> we are porting the gen68360 BSP to our board. With succes, even TCP/IP works
> nice. But now get stuck on the timmer stuff. What do we do wrong or have we
> forgotten when 5 sec. in the ticker example actualy gets to be 30 sec? We
> have a straigt 4.5.0 beta 2 release installed.
> Thanks for any help.
janovetz at uiuc.edu | How can it be that mathematics, being after all a
University of Illinois | product of human thought independent of experience,
| is so admirably adapted to the objects of reality?
PP-ASEL | - Albert Einstein
Disclaimer: The policies of this University certainly do not reflect my
own opinions, objectives, or agenda.