ERC32 BSP : Real Time Clock Problem

[joel.sherrill at OARcorp.com (Joel Sherrill)]

Antonio da Silva Fari?a wrote:
> 
> Hi,
> 
> I have problems with applications which define
> CONFIGURE_APPLICATION_NEEDS_CLOOK_DRIVER
> 
> These applications crash into Install_clock function during the
> rtems_io_initialize phase.

I suspect that there is some conflict over whether your
trap table is in ROM/RAM.  The sparc port can put the
trap table in either place.  

 
> If CONFIGURE_APPLICATION_NEEDS_CLOOK_DRIVER is
> not define application starts, tasks are created but calls like
> rtems_task_wake_after does not work, of course.

That's the obvious side-effect.  Other less obvious things
won't work either. :)
 
> Now I'm using the new LECCS compiler system, but the
> problem must be in board.

Probably not a compiler issue -- a board memory versus
BSP layout.


> Any idea...
> 
> Thanks
> --
> _______________________________________________________________________
> 
>  Antonio da Silva Fari?a
>  DIATEL-UPM                URL:    http://www.diatel.upm.es/~adasilva/
>  EUIT Telecomunicaci?n     mailto: adasilva at diatel.upm.es
>  Ctra. Valencia, Km. 7  Tel: +34 91 3367812   Fax: +34 91 3367817
>  28031 Madrid, SPAIN
> _________________________________________________________________________

-- 
Joel Sherrill, Ph.D.             Director of Research & Development
joel at OARcorp.com                 On-Line Applications Research
Ask me about RTEMS: a free RTOS  Huntsville AL 35805
   Support Available             (256) 722-9985