[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
rtems cygwin cross compiler setup problems (FIXED)
- Date: Thu, 15 Feb 2001 15:58:23 -0000
- From: kirk.bateman at esgem.com (Kirk Bateman)
- Subject: rtems cygwin cross compiler setup problems (FIXED)
Thanks for your helpful (and some funny :-) information for trying to resolve my problems....
Eventually I have it working,
Hopefully this information will be useful to someone ?? :-)
from cygnus solutions:
cygwin-b20_1-full.exe (if you can't find it ask a gcc palm pilot developer they probably have it)
latest cygwin dll update (you only need the cygwin1.dll but its in the .tgz file)
also required: rpm extractor for windows (rpm extractor ver 0.99 beta release 5)
Install cygwin-b20_1-full.exe (much nicer install than the new online setup.exe)
Modify path in autoexec.bat to include: c:\CYGNUS\CYGWIN~1\H-I586~1\BIN
Reboot to activate new path
Using rpm extractor for windows extract the files from oarcorp (IN THE ORDER THEY ARE LISTED ABOVE !!!!!)
note that you must exit rpm extractor between each file otherwise it will extract them under each other (very messy) or you
should be able to extract to the root directory
Modify path again: add this before the previous cygnus addition... C:\opt\rtems\powerpc-rtems\bin
Path should now be similar to:
from the latest cygwin dll update extract the cygwin1.dll and replace the old one.
Reboot machine again to take account of new path....
Hey Presto, the gcc rtems powerpc cross compiler should now work properly.....
I don't suffer from insanity, I enjoy every minute of it.
Software Engineer - Esgem Limited
Head Office: 30 Long Street, Wotton-under-Edge, Glos GL12 7BT
Registered in England at 4, Bramley Close, Kingswood,
Wotton-under-Edge, Glos GL12 8SF. Reg No. 3372135
-------------- next part --------------
An HTML attachment was scrubbed...