[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Any news on GCC 3+ and GNAT/RTEMS?
- Date: Thu, 22 Aug 2002 11:43:07 +0200
- From: valette at crf.canon.fr (VALETTE Eric)
- Subject: Any news on GCC 3+ and GNAT/RTEMS?
Ralf Corsepius wrote:
>>So first question that comes in mind and make be inrelevant : do you
>>have specific rtems patch for the autoconf or automake software
> It basically is the standard procedure to install the packages, ie.
> cd <somewhere>
> tar xzvf autoconf-2.52.tar.gz
> cd autoconf-2.52
> ./configure --prefix=/opt/rtems
> make install
That for sure I know how to do that :-)
> The rpm.specs add some "nice-to-have" convenience stuff to these
> packages (man-page generation etc.), but this is not necessary for
> proper operation. The sequence above should be sufficient.
>>Next question is what are the command you have documented supposed to do
>>(if I have no rpm command, I must make it differently and understand
>>what really needs to be done).
> I don't fully understand your question, but you seem to be asking what
> the "cd scripts; ./configure ... etc." I described in my previous mail
Exactly what you typed : the regular configure, make, make install with
only the prefix command and no specific target/specific configure
options for rtems nor patch to the sources...
Thanks a lot. I should be able to build rtems this afternoon. I will
report sucess (I hope) or error to let you know.
Have a nice day,
/ ` Eric Valette - Canon CRF
/-- __ o _. Product Dev. Group Software Team Leader
(___, / (_(_(__ Rue de la touche lambert
35517 Cesson-Sevigne Cedex
Tel: +33 (0)2 99 87 68 91 Fax: +33 (0)2 99 84 11 30
E-mail: valette at crf.canon.fr http://www.crf.canon.fr