[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Which MPC74xx PrPMC board?
- Date: Mon, 13 Oct 2003 07:58:50 -0400
- From: feng at bnl.gov (Feng, Shuchen)
- Subject: Which MPC74xx PrPMC board?
Joel Sherrill wrote :
> I look forward to seeing this one submitted. :)
Thanks. We were told that the board is in high
demand, which might explain why it is cost
competitive. We decided on the MVME5500 because
we wanted to have a board that seems to be promising
for a long life cycle. We can use the MVME5500
with a VME,a VMe64(x), or even a VXS (the future)
crate. For the long range, it is economical for
us to standerize between the low-end and high-end
> Are you able to make this another variant of the
> motorola_powerpc BSP?
That is the direction I tried to head for. I had to
add L3 cache support in the bspstart.c. The L2
definition and flushings are different, too.
Besides, the following
codes in the libbsp/powerpc/shared/startup/bspstart.c
bothers me :
l2cr = get_L2CR();
if ( (! (l2cr & 0x80000000)) && ((int) l2cr == -1))
I did not power up the mvme5500 for testing the L2CR
yet. However, by the book, for the 7455, I changed
it to :
if ( (! (l2cr & 0x80000000)) && ((int) l2cr != -1))
And in the
For the get_L2CR(), I returned -1 instead of 0 for CPU
that does not support L2.
Did I change the original meaning or intention by doing
The rest of codes for the cache handling looks good too
Anway, 1) I am not supposed to count any chicken
before it is hatched. I posted the message
hoping collaboration instead of duplication.
2) I have no full document yet.
The release of the technical document for the
marvell discovery contoller requires a
Non Disclosure Agreement (NDA) signed.
Based on the E-mail from the attorney on site,
I might obtain an access to the document
sometimes this week, which is hard for me