[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: RTEMS port to Virtex-4/PowerPC
Robert S. Grimes wrote:
1. I suppose the processor I start with is libcpu/powerpc/ppc403 - is
2. As for the BSP, do I start with libbsp/powerpc/gen405 - is this correct?
I have been using 4.6.x with xilinx's v2Pro/powerpc for almost a year
now. AFAIA, from rtems perspective, the v2pro ppc405 and the virtex4
ppc405 are identical.
The gen405 bsp is the way forward. There are a few problems with the
gen405 bsp as described about 6 months ago on the list (see:
once you get it going, it's very stable and runs fine.
I have drivers for several xilinx ip cores that I'm more than happy to
release under the rtems license (xilinx opb interrupt controller, xilinx
uart lite, xilinx opb ethernet controller).
I've been planning to integrate these along with some fixes for the
gen405 bsp for sometime, but had wanted to move them to the 4.7 codebase
before I did that. I haven't gotten around to that yet. If you, or
anyone else, want the current 4.6.x versions, let me know.
One other thing to be aware of. The 4.6.x ppc403/gen405 uses the "old
exception" model on rtems. Many (most?) other ppc ports have been moved
to the "new exception" model. AFAIK (anyone know more/better?) the 4.7
ppc40x code is also still old exceptions. When I integrate my drivers
and gen405 bug fixes, I was also planning on moving ppc403 to new
Anyway, I would be happy to share my experiences, time allowing of
course, and of course any hints or pointers would be greatly
appreciated! If others are interested in collaborating, or just want to
see how it's going, let me know...
I'm very keen to know of any changes in the xilinx/ppc405 area. I've
also got reasonable amounts of time and resources to collaborate with
others on it.