[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Problems initializing Network driver on MCF5235 Coldfire

Date: Thu, 28 Jun 2007 00:09:51 +1000
From: chrisj at rtems.org (Chris Johns)
Subject: Problems initializing Network driver on MCF5235 Coldfire

CWolfe at motioncontrol.org wrote:
>
> i don't have a handy way to do this directly. since I am using a parallel port that is not 
> integrated with bios, I haven't been able to get cygwin/gdb/bdm to connect to the device

The BDM support directly accesses the hardware and does not access the BIOS.

You need to install the GiveIO driver for BDM to work. Do you have the GiveIO 
driver installed ?

What sort of parallel port do you have ?

Regards
Chris

References:
- Problems initializing Network driver on MCF5235 Coldfire
  - From: chrisj at rtems.org (Chris Johns)
- Problems initializing Network driver on MCF5235 Coldfire
  - From: Alan.P.Cudmore at nasa.gov (Alan Cudmore)
- Problems initializing Network driver on MCF5235 Coldfire
  - From: CWolfe at motioncontrol.org (CWolfe at motioncontrol.org)

Prev by Date: Problems initializing Network driver on MCF5235 Coldfire
Next by Date: GCC 4.1.1 m68k-rtems generating invalid code for -m5307 proce ssor ?
Previous by thread: Problems initializing Network driver on MCF5235 Coldfire
Next by thread: Problems initializing network on mcf5235BCC
Index(es):
- Date
- Thread