[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Building RTEMS 4.7.0 (target=arm-rtems4.7)

Date: Mon, 19 Mar 2007 13:49:45 -0000
From: Teemu.Karevaara at PERKINELMER.COM (Karevaara, Teemu)
Subject: Building RTEMS 4.7.0 (target=arm-rtems4.7)

     Hello,

  I tried to build RTEMS to ARM. I left out the BSP definition in order
to build the source for all the supported board packages. The makefile
script did not create any directory for BSPs. According to the
installation instructions the RTEMS_MAKEFILE_PATH should be set to
reference to this BSP specific directory. I could not find any relevant
error messages in the makefile output. Does anyone have a clue what
might be the problem?

  Regards,
    -Teemu Karevaara 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://rtems.rtems.org/pipermail/rtems-users/attachments/20070319/19fe044e/attachment.html

Follow-Ups:
- Building RTEMS 4.7.0 (target=arm-rtems4.7)
  - From: ralf.corsepius at rtems.org (Ralf Corsepius)

Prev by Date: Event handling problem
Next by Date: rtems_semaphore_obtain
Previous by thread: Building GNU Cross Compiler Toolset (v4.7.0)
Next by thread: Building RTEMS 4.7.0 (target=arm-rtems4.7)
Index(es):
- Date
- Thread