[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
LEON2 console ringbuf.h
- Date: Mon, 17 Mar 2008 20:13:50 +0100
- From: jfa at reexsa.com (jfa at reexsa.com)
- Subject: LEON2 console ringbuf.h
Thanks for your suggestion. I tried it but didn't work. I think I haven't
explained my problem properly.
If I run the configure script with the CONSOLE_USE_INTERRUPTS=1 then, "make"
will try to compile console.c. So, I think that the CONSOLE_USE_INTERRUPTS
flag is working properly.
The problem is while compiling console.c. It can not find ringbuf.h. My
guess is that I have a problem with the includes or the way I have placed
The toolchain is at:
And the rtems source code is located at:
Where shall ringbuf.h be located at? If I do a find on my system ringbuf.his at:
Date: Sat, 15 Mar 2008 19:10:12 +0100
From: "John Pickwick" <john.pickwick at free.fr>
Subject: Re: LEON2 console ringbuf.h
To: <rtems-users at rtems.org>
Message-ID: <006001c886c7$d04d4d40$6394e552 at hal>
Content-Type: text/plain; charset="iso-8859-1"
to do this I simply modified the .cfg file (leon2.cfg) and added a
CONSOLE_USE_INTERRUPTS compilation directive to the CFLAGS line.
It works in 4.7.1.
----- Original Message -----
From: jfa at reexsa.com
To: rtems-users at rtems.org
Sent: Friday, March 14, 2008 6:21 PM
Subject: LEON2 console ringbuf.h
I am trying to build an RTEMS for a LEON2 processor using the UART support
(CONSOLE_USE_INTERRUPTS=1). The compilation fails when processing
console.cbecause it can not find
I have tried with rtems-126.96.36.199 and the prebuitl tools from Gaisler
Research, and with the rtems-4.8 and a self made toolchain. Both of them
work without problems without the UART support.
../rtems-4.8.0/configure --target=sparc-rtmes --enable-rtemsbsp=leon2
--enable-test=samples --disable-itron --disable-posix
Any hint of what could I be missing?
-------------- next part --------------
An HTML attachment was scrubbed...