Embedded PC IDE Flash Questions

[newsgroups at smartcontroller.com.au (Angelo Fraietta)]

Yes - I did this a while ago. It required a different build to enable IDE1.
I would have to really dig about to find that. My old RTEMs mail
archives are gone.

Joel Sherrill wrote:
> Hi,
>
> I have a Winsystems EBC-855 and am trying to
> access the CompactFlash.  It is on
> IDE1 and nothing is on IDE0 so I enabled the
> secondary IDE/
>
> http://sbc.winsystems.com/products/ebc-855.cfm
>
> The IDE Flash is formatted for DOS and will boot
> DOS.  I used the telnetd example with the DOS FS
> support enabled.  The drive is showing up as
> /dev/hdc but the system locks up when I
> try to "fdisk /dev/hdc register" or
> "fdisk /dev/hdc" to look at the partition table.
>
> Any thoughts from someone who has done this
> before?
>
>   
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.339 / Virus Database: 270.12.41/2136 - Release Date: 05/26/09 20:20:00
>
>