M5484FireEngine
From RTEMSWiki
| M5484FireEngine | |
 | |
| Board Name | M5484 |
|---|---|
| Manufacturer | Fire Engine |
| Reference | http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=M5484LITE |
| Architecture | Freescale Fire Engine |
| CPU Model | MCF5484CZP200 |
| Runs on Simulator? | No. |
| RAM | 64MB DDR-SDRAM |
| Non-volatile Memory | 4MB Flash |
| Serial Ports | One RS-232 Serial Port |
| Video | Video Unspecified. |
The M5484LITE development kit contains a system-on-module, called a Fire Engine, containing 64 MBytes of DDR-SDRAM, 4 MB of Boot Flash,and a USB Device output. The Fire Engine module, along with the included ethernet ports, PCI slot, serial interface, CAN interface, and a ColdFire debug module. The board includes:
The M5484 Fire Engine Module (SOM-ETX) includes
- MCF5484CZP200 Processor
- Limited superscalar V4 ColdFire processor core
- Double-precision FPU conforms to IEE-754 standard
- 64MB DDR-SDRAM
- 4MB Flash
The base board includes the following features:
- Controller Area Network (CAN) 2.0B Interface
- 32-bit double data rate (DDR) synchronous DRAM (SDRAM) controller
- 66–133 MHz operation
- Supports DDR and SDR DRAM
- Built-in initialization and refresh
- Up to four chip selects enabling up to one GB of external
- 32-Kbyte system SRAM
- Arbitration mechanism shares bandwidth between internal bus masters
- IrDA 1.1 interfaces
- Up to four programmable serial controllers (PSCs) each with separate 512-byte receive and transmit FIFOs for UART, USART, modem, codec
- Debug and test features
- ColdFire background debug mode (BDM) port
- JTAG/ IEEE 1149.1 test access port
- Estimated power consumption
- Less than 1.5W (388 PBGA)
