Mcf5206elite
Danielcode (Talk | contribs) (→Test Reports) |
Danielcode (Talk | contribs) |
||
| Line 29: | Line 29: | ||
=Downloading and Executing= | =Downloading and Executing= | ||
| − | + | Describe the download procedure. | |
| − | + | ||
=Debugging= | =Debugging= | ||
Latest revision as of 11:36, 27 November 2010
| Mcf5206elite | |
| Board Name | MCF5206Elite |
|---|---|
| Manufacturer | Motorola |
| Reference | http://www.acm.uiuc.edu/sigarch/resources/docs/coldfire_M5206ELITEUM.pdf |
| Architecture | Freescale Coldfire |
| CPU Model | MCF5206e |
| Monitor | uBoot, uMon |
| Runs on Simulator? | Coldfire |
| Aliases | No |
| RAM | 1 MB SRAM |
| Non-volatile Memory | 1 MB Flash |
| Serial Ports | 2 x UARTs |
| Video | Video Unspecified. |
| Other | Power Requirements are +5V regulated power supply |
Contents |
[edit] Overview
The M5206eLITE is a versatile single board computer based on MCF5206e ColdFire® Processor. It may be used as a powerful microprocessor based controller in a variety of applications. With the addition of a terminal, it serves as a complete microcomputer system for development/evaluation, training and educational use. To have a fully functional system, all that is required is an RS-232 terminal (or a PC with terminal emulation software) and a regulated 5V power supply. It is possible to expand the memory and I/O capabilities of this board by connecting additional hardware via the Microprocessor Expansion Bus connectors, although it may be necessary to add bus buffers to accomodate additional bus loading.
[edit] Board Setup
If there are special jumper or ROM monitor settings, describe them.
[edit] Downloading and Executing
Describe the download procedure.
[edit] Debugging
How do you debug code on this board? What gdb setup? BDM, stub, etc?
[edit] Test Reports
4.7-branch 2006-11-15: User:JoelSherrill reports that hello, ticker, and paranoia run using the Coldfire simulator.
The Coldfire simulator available from http://www.slicer.ca/coldfire/index.php will run this BSP although that simulator is EXTREMELY slow taking 8-10 times real-time on a fast development machine. Instructions for running an executable on this BSP were posted to the RTEMS list (http://www.rtems.com/ml/rtems-users/2006/january/msg00153.html). The only tricky thing using those instructions is that you have to convert the ELF .exe into a binary using objcopy before downloading it to the simulator.
[edit] References
- http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=M5206ELITE&parentCode=MCF5206E
- http://smartdata.usbid.com/datasheets/usbid/2000/2000-q3/an2005.pdf
| |||||
